HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

Table 9 Specific error codes for pairsplit
ValueRecommended actionError messageError codeCategory
236Confirm status using the pairdisplay
command. Make sure all volumes in the group
Unmatched volume
status within the group
EX_ENQVOLVolume status
have the same fence level and volume
attributes.
229Confirm pair status using pairdisplay.Inconsistent status in
group
EX_INCSTG
222Confirm volume status/attribute using
pairdisplay l or 'raidvchkdsp v aou'.
Invalid volume statusEX_INVVOL
235Confirm pair status using pairdisplay, and
change combination of volumes.
Pair Volume
combination error
EX_EVOLCE
228Confirm pair status using pairdisplay.Invalid pair statusEX_INVSTP
234Issue pairresync manually to the identified
failed paired volume to try to recover it. If the
trouble persists, call HP Technical Support.
Pair suspended at
WAIT state
EX_EWSUSEUnrecoverable
Examples
Figure 8 Example of -FHORC option for pairsplit
Figure 9 Example of -FMRCF option for pairsplit
pairresync
The pairresync command re-establishes a split pair volume and then restarts the update copy
operations to the secondary volume. The pairresync command can resynchronize either a paired
logical volume or a group of paired volumes. The normal direction of resynchronization is from
the primary volume to the secondary volume. If the --restore option is specified (Business Copy
only), the pair is resynchronized in the reverse direction (For example, secondary volume to primary
volume). The primary volume remains accessible during pairresync, except when the -restore option
is specified. The secondary volume becomes write-disabled when the pairresync command is
issued. The primary volume’s server is automatically detected by the pairresync command, so the
server does not need to be specified in the pairresync command parameters.
pairresync 31