HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

Table 7 List of settable character lengths (continued)
Remote Web ConsoleRAID Manager commandName
256 characters63 charactersUser name (User ID)
256 characters63 charactersUser name (Password)
Differences with Remote Web Console
The operation procedures and the operatable contents are partly different between RAID Manager
and Remote Web Console. The following table shows the operational differences with Remote
Web Console.
Table 8 List of differences in operation with Remote Web Console
Remote Web ConsoleRAID ManagerContents Operation
Available to specify the path groups on the
screen and to execute the path definition
at one time.
The path definition is required for
each external volume belongs to
the path group.
Path addition or change for the external
volume (External Storage)
Host mode can be referred regardless of
the LU path definition.
The host mode cannot be referred
for the host group that has no LU
path definition.
Host mode reference
Registration can be done on the both way
of specifying or not specifying CU.
The only method of not specifying
CU (CU free) is available.
RCU registration
All of the operations (newly addition,
changing, and deleting) are not available.
The resources that operate in this
program product cannot be
Operation when a program product is
not installed
added newly. Changing or
deleting is available.
ExistedNoneI/O check of the LU path definition
Displays even if the LUN security is
disabled (gray display).
Displays only when the LUN
security is enabled.
WWN display
EssentialOptionPool ID setting
The size can be specified in both ways of
GB and LBA. There are some corrections
on the GB specifying.
The size can be specified in both
way of GB and LBA.
When specifying GB, note the
following items.
LDEV creation
• There is no size correction.
• If the capacity of LDEVs that
are created by each GUI and
CLI are the same, a copy pair
might not be created. To
create a pair with the LDEV
that is created by GUI, create
a LDEV by specifying LBA.
Specify the total capacity after extending.Specify the size of extending
capacity.
Extending the capacity of Thin
Provisioning volume
20 Overview of commands