HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

DEF: The mode in which the start/termination of the monitor is performed by the instruction of the
CLI, and the Tier range setting is performed by the automatic calculation of the DKC.
AUT: The mode in which the start/termination of the monitor is performed by time specification
and the Tier range setting is performed by the automatic calculation of the DKC.
Note: AUT cannot be instructed from the CLI. Only performed if displayed when set from the SN2.
STS
This displays the operational status of the performance monitor and the tier reallocation.
STP: The performance monitor and the tier reallocation are stopped.
RLC: The performance monitor is stopped. The tier reallocation is operating.
MON: The performance monitor is operating. The tier reallocation is stopped.
RLM: The performance monitor and the tier reallocation are operating.
DAT
This displays the status of the monitor information.
VAL: Valid.
INV: Invalid.
PND: Being calculated.
TNO
Tier range number
TL_RANGE[IOPH]
Lower limit value (Hexadecimal) of the Tier
TD_RANGE[IOPH]
Delta value (Hexadecimal) of the Tier
TU_CAP(MB)
Tier capacity (Usage amount)
TT_CAP(MB)
Tier capacity (Total capacity)
T(%)
The free space percentage for the newly allocation
P(%)
Performance working ratio
R(%)
Progress percentage of reallocation.
0 to 99: Shows one of the following statuses.
• When the value of STS is RLC or RLM: Reallocation is in progress.
• When the value of STS is STP or MON: Reallocation is suspended.
100: Shows if the reallocation operation is not in progress, or the reallocation is completed.
raidcom set hba_wwn
This sets a nickname (max. 32 characters) to the specified WWN on the specified port.
If the specified port does not exist, it will be rejected with EX_ENOOBJ.
If the nickname exists to the specified WWN, it will be changed to NEW.
raidcom set hba_wwn 181