HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

- POLN: “Pool Normal” (The pool is in the normal status.)
- POLF: “Pool Full” (The pool is in the overflow status exceeding the threshold.)
- POLS: “Pool Suspend” (The pool is in the overflow status exceeding the threshold and is suspended.)
- POLE: “Pool failure” (The pool is suspended in the failure status.) In this status, the pool information
cannot be displayed.
U(%)
This displays the usage rate of the pool.
AV_CAP(MB)
This displays the available capacity for the Thin Provisioning/Smart Tiers volumes mapped to this
pool.
TP_CAP(MB)
This displays the total capacity of the pool.
W(%)
This displays the threshold value for “WARNING” set for the pool.
H(%)
This displays the threshold value set for the pool as high water mark.
Num
This displays the number of LDEVs configuring the pool.
LDEV#
This displays the first number of the LDEV configuring the pool.
LCNT
This displays the total number of Thin Provisioning/Smart Tiers volumes mapped to the pool.
TL_CAP(MB)
This displays the total capacity of all Thin Provisioning volumes mapped to the pool.
The tier information of the pool for Smart Tiers is displayed. For details about each parameter, see
the manual HP P9000 Provisioning for Open Systems User Guide.
# raidcom get thp_pool -key opt
PID POLS MODE STS DAT TNO TL_RANGE TD_RANGE TU_CAP(MB) TT_CAP(MB) T(%) P(%) R(%)
001 POLN MAN STP VAL 1 00005000 00003000 200000 1000000 80 54 98
001 POLN MAN STP VAL 2 00003000 00002000 400000 1000000 80 54 98
001 POLN MAN STP VAL 3 00002000 00002000 600000 1000000 80 54 98
002 POLF AUT MON PND 1 - - 500000 1000000 80 54 100
Description on each column in output example
PID
This displays the Thin Provisioning/Smart Tiers pool ID.
POLS
This displays the following status of the pool.
- POLN: “Pool Normal” (The pool is in the normal status.)
- POLF: “Pool Full” (The pool is in the overflow status exceeding the threshold.)
- POLS: “Pool Suspend” (The pool is in the overflow status exceeding the threshold and is suspended.)
- POLE: “Pool failure” (The pool is suspended in the failure status.) In this status, the pool information
cannot be displayed.
MODE
This displays the execution mode.
180 Configuration setting commands