HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

DescriptionOption
XP12000 Disk Array/XP10000 Disk Array:R500, XP24000/XP20000 Disk Array:R600,
P9500:R700
< pid> is used to set the path group ID (1-255).
Specifies a Port number on the MCU.-mcu_port <port>
Specifies a port number on the RCU (storage system port on the remote side).-rcu_port <port>
Specify the port that the attribute is MCU Initiator port (MCU) or RCU Target port (RCU).
Examples
From the RCU for which the product number; 64034, the RAID type: P9500 and the path ID: 1
are set, deleting RCU path: mcu port: CL1-A and rcu port CL1-B.
raidcom delete rcu_path -cufree 64034 R700 1 -mcu_port CL1-A -rcu_port CL1-B
raidcom get resource
Displays resource group information.
Syntax
raidcom get resource
Options and parameters
None
Examples
Displaying a resource group and exclusive lock information.
# raidcom get resource
RS_GROUP RGID stat Lock_owner Lock_host Serial#
meta_resource 0 Unlocked - - 64556
Description on each column in output example
RS_GROUP
Resource group name
RGID
This displays a resource ID.
RGID=0 is used for meta resource group.
stat
This displays the locking status of the resource group name on P9500.
Lock_owner
This displays a owner (authorized user) who locks the resource group name.
Lock_host
This displays a host name of a user who locks the resource group name.
Serial#
Product serial number.
raidcom lock resource
Locks the specified resource group name.
If the specified resource group name does not exist, it will be rejected with EX_ENOOBJ.
174 Configuration setting commands