HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

This displays the SLPR number to which a Parity Group or an external volume group belongs.
CL
This displays the CLPR number to which a Parity Group an external volume group belongs.
DRIVE_TYPE
This displays PRODUCT_ID of the drive configuring the Parity Group.
# raidcom get parity_grp -parity_grp_id 33-16
T GROUP P_NO LDEV# STS LOC_LBA SIZE_LBA Serial#
R 33-16 0 - NML 0x000000000000 0x000000003f00 64034
R 33-16 1 100 NML 0x000000003f00 0x000000010000 64034
R 33-16 2 101 REG 0x000000013f00 0x000000010000 64034
R 33-16 3 - DEL 0x000000023f00 0x0000f0000000 64034
Description on each column in output example
T: This displays the type of the volume group.
R: Parity Group, E: External volume group
GROUP
This displays the Parity Group number or the external volume group number.
P_NO
This displays the partition number partitioning this Parity Group.
LDEV#
This displays LDEV number.
STS
This displays the following status.
-NML: this means the status of “Normal” in LDEV.
-REG: this means the status of “Registering” in LDEV.
-DEL: this means the status of “Deleting” in LDEV.
LOC_LBA
This displays the Start of LBA for this partition on this Parity Group or the external volume group,
in units of 512 bytes.
SIZE_LBA
This displays the size for this partition on this Parity Group or the external volume group, in units
of 512 bytes.
Serial#
Product serial number.
raidcom add rcu
Registers RCUs. The only registration method is the method in which no CU is specified (CU free).
This command is executed asynchronously with the command input. Check the completion of this
process on the raidcom get command_status command.
Syntax
raidcom add rcu -cu_free <serial#> <id> <pid>
-mcu_port <port> -rcu_port <port>
168 Configuration setting commands