HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

This displays the following status of the external volume.
- NML: this means the status of “Normal” in external volume.
- CHK: this means the status of “Checking” in external volume.
- SYN: this means the status of “Cache Destage” in external volume.
- DSC: this means the status of “Disconnect” in external path for an external volume.
- BLK: this means the status of “blockading” in external path for an external volume.
- UNK: this means the status of “Unknown” in external volume.
- WAR: this means the status of “Warning” in external volume.
-CM
This displays the cache mode for external volume.
E: Enable, D: Disable
-IF
This displays the cache inflow control for external volume.
E: Enable, D: Disable
-MP#
This displays the MP Blade ID for the external volume owner.
-PORT
This displays the port number.
-WWN
This displays the target wwn on the external storage system.
-PR
This displays the priority number in the external volume path group.
-LUN
This displays the LUN in the port on the external storage system side.
-PHS
This displays the following status of the external path.
- NML: this means the status of “Normal” in external path.
- CHK: this means the status of “temporary blockading ” in external path.
- BLK: this means the status of “blockading” in external path.
- DSC: this means the status of “disconnected” in external path.
- UNK: this means the status of “Unknown” in external path.
-Serial#
This displays the serial number of external storage system.
-PRODUCT_ID
This displays the PRODUCT_ID of the external storage system.
raidcom delete pool
Deletes the specified pool for Snapshot/Thin Provisioning/Smart Tiers. The deletion of pool VOL
is not supported on Version01.
This command is executed asynchronously with the command input. Check the completion of this
process on the raidcom get command_status command.
160 Configuration setting commands