HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

DescriptionOption
For example:
• CL1-A-g (g: 0-255)
• CL1-A Linux_X86
Specifies a LUN number (0-2047).-lun_id <lun#>
Specifies a CU:LDEV hexadecimal address double octet or an LDEV number (0-65279) or a
range.
-ldev_id <ldev#> …
For example:
• -ldev_id AB:CD
• -ldev_id 43981
• -ldev_id 01:2C-01:31
Specifies the device information extracted from the LDEV belonging to the device group. Specify
“ldev” (fixed). The information of LDEV belonging to the device group is used.
-grp_opt <group
option>
Specifies the name of device group (max. 32 characters) to be operated.-device_grp_name
<device group name>
[<device name>]
To operate an LDEV in the device group, specify the device name of LDEV (max. 32 characters)
within the device group.
If the device name is omitted, all the LDEVs belonging in the device group are operated.
Examples
Deleting LUN: 1(LDEV number 200) on the port: CL1-A-0
raidcom delete lun -port CL1-A-0 -lun 1
raidcom delete lun -port CL1-A-0 -ldev_id 200
Deleting LDEV belonging to the device group: grp1 on the port: CL1-A-0
raidcom delete lun -port CL1-A-0 -grp_opt ldev -device_grp_name grp1
raidcom discover lun
Searches external volumes. Displays a list of LUs which can be referred to from the External port
of a specific external storage system.
Syntax
raidcom discover lun -port <port> -external_wwn <wwn strings>
Options and parameters
DescriptionOption
Specifies a Port number. It specifies a port of whose attribute is External.-port <port>
For example:
• CL1-A
Specifies a WWN value (hexadecimal value) of the external storage system in 8 bytes. The
value can be split in units of 4 bytes by “,” (commas).
-external_wwn <wwn
strings>
For example:
• 21000e08b0256f8
• 21000e0,8b0256f8
154 Configuration setting commands