HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

Table 5 Configuration setting commands (continued)
DescriptionCommand
Displays the host group information.raidcom get host_grp
Registers a host to a host group.raidcom add hba_wwn
Deletes a host (WWN) from a host group.raidcom delete hba_wwn
Displays WWN information of a registered host bus adapter.raidcom get hba_wwn
Sets the LU paths.raidcom add lun
Deletes a LU path on the host group of the specified port.raidcom delete lun
Displays LU path information.raidcom get lun
Sets a port.raidcom modify port
Displays port information.raidcom get port
Displays LDEV information.raidcom get ldev
Extends the virtual volume capacity of Thin Provisioning/Smart
Tiers V-VOL.
raidcom extend ldev
Creates LDEV or V-VOL.raidcom add ldev
Deletes LDEV or V-VOL.raidcom delete ldev
Displays a parity group information.raidcom get parity_grp
Displays the external volume information that is already
registered.
raidcom get external_grp
Changes the attribute of an LDEV.raidcom modify ldev
Formats an LDEV.raidcom initialize ldev
Searchs the external storage information.raidcom discover external_storage
Searchs the external volume information.raidcom discover lun
Maps an external volume.raidcom add external_grp
Unmaps an external volume.raidcom delete external_grp
Changes the attribute of an external volume.raidcom modify external_grp
Checks the connection for an external volume and restarts using.raidcom check_ext_storage external_grp
Disconnects the connection for an external volume.raidcom disconnect external_grp
Adds an external path for External Storage to the existed path
group.
raidcom add path
Deletes an external path for External Storage.raidcom delete path
Recovers a path for the external volume.raidcom check_ext_storage path
Stops a path for the external volume.raidcom disconnect path
Displays an external path for External Storage.raidcom get path
Displays RCU information.raidcom get rcu
Registers an RCU.raidcom add rcu
Deletes an RCU.raidcom delete rcu
Sets an attribute of RCU.raidcom modify rcu
Add a logical path of RCU.raidcom add rcu_path
Command summary 15