HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

Options and parameters
DescriptionOption
Specifies a CU:LDEV hexadecimal address double octet or an LDEV number (0-65279) or a
range.
-ldev_id <ldev#> …
For example:
• -ldev_id AB:CD
• -ldev_id 43981
• -ldev_id 01:2C-01:31
Specifies the relevant LDEV with a device file.-dldev_id <device file>
Specifies a count (2-65280).[ -cnt <count> ]
The count becomes singular if the specification is omitted.
Specifies the device information extracted from the LDEV belonging to the device grouppecify
“ldev” (fixed). The information of LDEV belonging to the device group is used.
-grp_opt <group
option>
Specifies the name of device group (max. 32 characters) to be operated.-device_grp_name
<device group name>
[<device name>]
To operate an LDEV in the device group, specify the device name of LDEV (max. 32 characters)
within the device group.
If the device name is omitted, all the LDEVs belonging in the device group are operated.
Specifies a display keyword.[ -key <keyword> ]
Displays basic LDEV information if the specification is omitted.
If the specification is performed, the following information is displayed.
The following display keywords can be specified:
front_end: Front-end information
parity_grp: Parity group information
external: External volume information
Some keywords might not be displayed, depending on the LDEV attribute.
ElunrgrpfrntLDEV attribute
NYYInternal volumeNormal volume
YNYExternal volume
NNYPoolVolume (V-VOL) for
Snapshot/Thin
Provisioning/Smart Tiers
NYNInternal volumeJournal volume
YNNExternal volume
Legend
Y: Displayed
N: Not displayed
Examples
Displaying the information of the LDEV number 577 (internal VOL).
# raidcom get ldev -ldev_id 577
Serial# : 63502
LDEV : 577
SL : 0
raidcom get ldev 145