HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

DescriptionOption
For example:
• 21000e08b0256f8
• 21000e0,8b0256f8 (The value can be split in units of 4 bytes by “,” (commas).)
Examples
Setting the WWN of host bus adapter: 210000e0, 8b0256f8 to the port: CL4-E, the host group
#0.
raidcom add hba_wwn -port CL4-E-0 -hba_wwn 210000e0,8b0256f8
raidcom delete hba_wwn
Deletes the host (WWN) from the host group.
Ignored if the specified WWN does not exist.
Syntax
raidcom delete hba_wwn -port <port> [<host group name>] -hba_wwn <WWN strings>
Options and parameters
DescriptionOption
Specifies a port number, a host group ID, and a host group name. It cannot be specified when
more than 64 characters is set for the host group name. Use the host group ID.
-port <port>[<host
group name>]
For example:
• CL1-A-g (g is from 0 to 255)
• CL1-A Linux_X86
Specifies a WWN value (hexadecimal value) of host bus adapter.-hba_wwn <WWN
strings>
For example:
• 21000e08b0256f8
• 21000e0,8b0256f8 (The value can be split in units of 4 bytes by “,” (commas).)
Examples
Deleting the WWN of host bus adapter: 210000e0,8b039800 set for the port: CL4-E, the host
group #0.
raidcom delete hba_wwn -port CL4-E-0 -hba_wwn 210000e0,8b039800
raidcom get hba_wwn
Displays the WWN of the host bus adapter registered to the host group.
Syntax
raidcom get hba_wwn -port <port> -[<host group name>]
Options and parameters
DescriptionOption
Specifies a port number, a host group ID, and a host group name. It cannot be specified when
more than 64 characters is set for the host group name. Use the host group ID.
-port <port>[<host
group name>]
134 Configuration setting commands