HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

DescriptionOption
22: Veritas Cluster Server
23: REC command support
33: Invalidating setting and reporting of device identifiers
40: V-Vol extension
41: Prioritized device recognition command
42: Inhibiting "OHUB PCIretry"
43: Queue Full Response
48: ESAM Svol Read Option
54: Support Option for the EXTENDED COPY command
This parameter is used when setting the option bits for the host mode option. For more details,
see the HP P9000 Provisioning for Open Systems User Guide.
Byte [n] MSB-------Bit------LSB
Byte [0] 00 01 02 03 04 05 06 07
Byte [1] 08 09 10 11 12 13 14 15
:
:
Byte [11] 88 89 90 91 92 93 94 95
Examples
Setting the host mode: HP-XP for the port: CL4-E, the host group: #2.
raidcom modify host_grp -port CL4-E-2 -host_mode HP-XP
Setting the host mode: HP-XP and the host mode option: 2, 13 for the port: CL4-E, the host group:
#2.
raidcom modify host_grp -port CL4-E-2 -host_mode HP-XP -host_mode_opt 2 13
Clearing the host mode options of the host mode: HP-XP of the port: CL4-E, the host group: #2.
raidcom modify host_grp -port CL4-E-2 -host_mode HP-XP -host_mode_opt 100
raidcom add hba_wwn
To add a host, this registers the WWN of the host bus adapter to the host group on the specified
port.
Ignored if the specified WWN already exists.
Syntax
raidcom add hba_wwn -port <port> [<host group name>] -hba_wwm <WWN strings>
Options and parameters
DescriptionOption
Specifies a port number, a host group ID, and a host group name. It cannot be specified when
more than 64 characters is set for the host group name. Use the host group ID.
-port <port>[<host
group name>]
For example:
• CL1-A-g (g is from 0 to 255)
• CL1-A Linux_X86
Specifies a WWN value (hexadecimal value) of host bus adapter.-hba_wwn <WWN
strings>
raidcom add hba_wwn 133