HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

41 Prioritized device recognition command
42 Prevent "OHUB PCI retry"
43 Queue Full Response
48 ESAM Svol Read Option
54 Support Option for the EXTENDED COPY command
raidcom modify host_grp
This sets a host mode to the host group on the specified port.
If you want to set Host mode option, then specify “-host_mode_opt” option.
If you want to reset Host mode option, then specify “-host_mode_opt 100.”
It ignores when no specified host group does not exist.
Syntax
raidcom modify host_grp -port <port> [<host group name>] -host_mode < host mode>
[-host_mode_opt <host mode option> … ]
Options and parameters
DescriptionOption
Specifies a port number, a host group ID, and a host group name. It cannot be specified when
more than 64 characters is set for the host group name. Use the host group ID.
-port <port>[<host
group name>]
For example:
• CL1-A-g (g is from 0 to 255)
• CL1-A Linux_X86
Specifies a host mode.-host_mode
<host mode>
Specify one of the following strings. For more details, see the HP P9000 Provisioning for Open
Systems User Guide.
• LINUX/IRIX
• VMWARE
• HP-XP
• OVMS
• TRU64
• SOLARIS
• NETWARE
• WIN
• AIX
• VMWARE_EX
• WIN_EX
• Ext Storage
Host mode option[ -host_mode_opt
<host mode option>…
]
2: VERITAS Database Edition/Advanced Cluster
6: TPRLO
7: LUN automatic recognition function
12: Ghost LUN undiplaying function
13: SIM report in link failure
14: HPTruCluster in the Continuous Access Synchronous function
15: HACMP
132 Configuration setting commands