HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

Options and parameters
DescriptionOption
Specifies a port number, a host group ID, and a host group name. It cannot be specified when
more than 64 characters is set for the host group name. Use the host group ID.
-port <port>[<host
group name>]
For example:
• CL1-A
• CL1-A-g (g is from 0 to 255)
• CL1-A Linux_X86
If you specified these settings, the information about all host groups that are defined on the
specified port is displayed, regardless of the examples.
Examples
Displaying the host group information set for the port: CL4-E.
# raidcom get host_grp -port
CL8-APORT GID GROUP_NAME Serial#
CL8-A 0 8A-G00 64577
CL8-A 1 Win_export 64577
CL8-A 2 Linux_X86 64577
PORT
This displays a port number.
GID
This displays a host group ID of a port.
GROUP_NAME
This displays a host group name of a port.
Serial#
Product serial number.
HMD
This displays the following HOST MODE for the host adapter setting on host group.
HP-XP, SOLARIS, AIX, WIN, LINUX/IRIX, TRU64, DYNIX, OVMS, NETWARE,
VMWARE, HP-XP, VMWARE_EX, WIN_EX, Ext Stor
HMO_BITs
This displays the following BITs for HOST mode option setting on host group.
BIT meaning
2 VERITAS Database Edition/Advanced Cluster
6 TPRLO
7 Automatic recognition function of LUN
12 Undisplay function of ghost LUN
13 SIM report at link failure
14 HP TruCluster with Continuous Access Synchronous function
15 HACMP
22 Veritas Cluster Server
23 REC command support
33 Set/Report Device Identifier enable
40 V-Vol expansion
raidcom get host_grp 131