HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

DescriptionOption
For example:
• -ldev_id AB:CD
• -ldev_id 43981
• -ldev_id 01:2C-01:31
Specifies the device information extracted from the LDEV belonging to the device group. Specify
“ldev” (fixed). The information of LDEV belonging to the device group is used.
-grp_opt <group
option>
Specifies the name of device group (max. 32 characters) to be operated.-device_grp_name
<device group name>
[<device name>]
To operate an LDEV in the device group, specify the device name of LDEV (max. 32 characters)
within the device group.
If the device name is omitted, all the LDEVs belonging in the device group are operated.
Examples
Disconnect the connection to the External Volume Group#1-1.
raidcom disconnect external_grp -external_grp_id 1-1
Disconnect the connection to the external volume group including the external volume (LDEV:200)
to “blocked”.
raidcom disconnect external_grp -ldev_id 200
Disconnect the connection to the external volume group including the LDEV belonging to the device
group: grp1.
raidcom disconnect external_grp -grp_opt ldev -device_grp_name grp1
raidcom get external_grp
Displays the information of registered external volumes.
Syntax
raidcom get external_grp [-external_grp_id <gno-sgno>]
Options and parameters
DescriptionOption
Specifies an external volume group number (gno:1-16384, sgno:1-4096).[ -external_grp_id
<gno-sgno> ]
If the specification is omitted, the list of the registered external volumes is displayed.
If the specification is performed. the LDEV information defined for the specified external volumes
is displayed.
For example:
52-11
Examples
Displaying external volume information (The display might not be in ascending order.).
#raidcom get external_grpT GROUP Num_LDEV U(%) AV_CAP(GB) R_LVL E_TYPE SL CL DRIVE_TYPEE 1-1
0 0 100 - OPEN-V 0 0 OPEN-VE 1-2
0 0 30 - OPEN-V 0 0 OPEN-V
Description on each column in output example
T
This displays the type of the volume group.
R: Parity Group, E: External Volume Group
126 Configuration setting commands