HP P9000 RAID Manager Reference Guide (T1610-96037, October 2011)

If -mirror_id is not specified at the creation, “-” is displayed.
JID#
Journal number to which device group belongs
Serial#
Product serial number
raidcom add device_grp
Assigns a device name to the specified LDEV and creates a device group.
If the group exists, the LDEV is added to the group.
If the LDEV also already exists in the specified device group, the specified LDEV name is set.
Syntax
raidcom add device_grp -device_grp_name <ldev group name>
<device name> -ldev_id <ldev#>… [-cnt <count>]
Options and parameters
DescriptionOption
Specifies a device group name (max. 32 characters) and a device group name in the device
group (max. 32 characters).
device_grp_name
<device group
name><device name>
Specifies a CU:LDEV hexadecimal address double octet or an LDEV number (0-65279) or a
range.
-ldev_id <ldev#> …
If multiple LDEVs are specified, the same device name is set for all of them.
For example:
• -ldev_id AB:CD
• -ldev_id 43981
• -ldev_id 01:2C-01:31
Up to 64 LDEVs can be specified.
Specifies a count (2-64).[ -cnt <count> ]
The count becomes singular if the specification is omitted.
Examples
Assigning a Device name: data1 to an LDEV: 400 and adding it to the Device group grp1.
raidcom add device_grp -device_grp_name grp1 data1 -ldev_id 400
raidcom delete device_grp
Deletes LDEVs from device groups.
This deletes the specified LDEV from the specified group.
When last LDEV is deleted, device group is deleted.
Syntax
raidcom delete device_grp -device_grp_name
<device group name> -ldev_id <ldev#>… [-cnt <count>]
raidcom add device_grp 121