HP P9000 RAID Manager Installation and Configuration User Guide (T1610-96031, October 2011)

Using CCI with Hitachi and other storage systems
Table 11 (page 30) shows the related two controls between CCI and the RAID storage system type
(Hitachi or HP XP). Figure 6 (page 31) shows the relationship among the application, CCI, and
RAID storage system.
• The following common HP API/CLI commands are rejected with EX_ERPERM(*1) by connectivity
of CCI with the RAID storage system:
horctakeover
paircurchk
paircreate
pairsplit
pairresync
pairvolchk
pairevtwait
pairdisplay
raidscan (except -find option only), raidar
raidvchkset
raidvchkdsp
raidvchkscan
• The following HP API/CLI commands are rejected with EX_ERPERM(*2) on HITACHI storage
system even when both CCI and HP RAID Raid Manager are installed:
pairvolchk -s
pairdisplay -CLI
raidscan -CLI
paircreate -m noread for Continuous Access Synchronous
paircreate -m dif/inc for Business Copy
Table 11 Relationship between CCI and RAID storage system
XP API/CLICommon API/CLIRAID systemInstallation orderCCI version
Cannot use (except
CLI)
EnableHitachiCCICCI 01-08-03/00 or later
EX_ERPERM(*1)HP
EnableHitachiInstall CCI after installing
RAID Manager
EnableHP
EnableEnableHPRAID ManagerHP RAID Manager
01.08.00 or later
EX_ERPERM(*2)EX_ERPERM(*1)Hitachi
EnableEnableHPInstall RAID Manager after
installing CCI
EX_ERPERM(*2)EnableHitachi
30 Installation requirements