HP X1000/X3000 Network Storage System Quick Start Guide (5697-0392, June 2010)

ManualsBrandsHP ManualsStorageHP StorageWorks X3400 Network Storage Gateway

HP X1000 and X3000 Network

Storage System Quick Start

Guide

SWX image version 1.6.0a

First edition: June 2010

The information in this document is subject to change without notice.

Printed in Puerto Rico

www.hp.com

*5697-0392*

Supported storage systems

These installation instructions apply to the following HP StorageWorks

Network Storage System models:

• HP StorageWorks X1400 Network Storage System

• HP StorageWorks X1500 Network Storage System

• HP StorageWorks X1600 Network Storage System

• HP StorageWorks X1800 Network Storage System

• HP StorageWorks X3400 Network Storage Gateway

• HP StorageWorks X3800 Network Storage Gateway

IMPORTANT:

The following systems are clustered bundle products with

different installation requirements than individual HP

StorageWorks X1000 and X3000 Network Storage Systems:

• HP StorageWorks X3410 1-node Network Storage System

• HP StorageWorks X3420 2-node Network Storage System

• HP StorageWorks X3820 2-node Network Storage System

If you purchased one of these storage system bundles, please

see the

HP StorageWorks X3000 1 node and 2 node Network

Storage System Installation Instructions

for instructions on how

to install and configure the components as a cluster.

Go to http://www.hp.com/go/nas, select your product family,

select your product model, click HP Support & Drivers, and

then click Manuals.

Supporting documentation

The following documentation provides additional information about using

your HP Network Storage System. To obtain this documentation, Go to

http://www.hp.com/go/nas, select your product family, select your

product model, click HP Support & Drivers, and then click Manuals.

• HP X1000 and X3000 Network Storage System User Guide

• HP StorageWorks Automated Storage Manager User Guide

• HP Rack Rail Kit Installation Instructions

• HP StorageWorks X3000 1-node and 2–node Network Storage

System Installation Instructions

• HP ProLiant Server Troubleshooting Guide

IMPORTANT:

Included with your storage system is the HP StorageWorks

Storage System Recovery DVD. This DVD is used to restore the

system to factory defaults. Keep this DVD in a safe place.

Page 1

Summary of content (3 pages)

PAGE 1
HP X1000 and X3000 Network Storage System Quick Start Guide Supported storage systems These installation instructions apply to the following HP StorageWorks Network Storage System models: • HP StorageWorks X1400 Network Storage System • HP StorageWorks X1500 Network Storage System • HP StorageWorks X1600 Network Storage System • HP StorageWorks X1800 Network Storage System • HP StorageWorks X3400 Network Storage Gateway • HP StorageWorks X3800 Network Storage Gateway IMPORTANT: The following systems are cl
PAGE 2
3. Install the storage system hardware 1. Install the rail kit by following the HP Rack Rail Kit Installation Instructions, part number 464164-001. From a remote computer, open a standard Web browser and enter the iLO 2 management hostname of the storage system. NOTE: By default, iLO 2 obtains the management IP address and subnet mask from your network’s DHCP server. The hostname found on the iLO 2 tag is automatically registered with your network’s DNS server. For more information, go to http://www.hp.
PAGE 3
other tools to configure your storage system, select No thanks. I will configure the system using other methods and then click Finish. The HP Configuration Assistant is available on all HP X1000 and X3000 Network Storage Systems. Use the HP Configuration Assistant to set up your system with basic configuration information. After the storage system installation process is complete, you can use the remote browser and remote desktop methods to access and configure the storage system.