HP StorageWorks 1000i Virtual Library System replacement instructions (May 2006)

2. For each DIMM, carefully insert it into a DIMM
socket (1) until the retaining clips snap back into
place (2).
Close chassis on
new appliance
8
1. Set the rear cover on the VLS1000i and slide it
toward the front of the appliance (1).
2. Secure the cover with one screw (2).
2
1
Install hard drives in
new appliance
9
1. For each drive, slide the drive fully into the drive bay
in the new appliance.
2. For each drive, slide the drive release button to the
right (1), push in the drive lever (2), then release the
drive release button to latch the drive lever.
1
2
2
2
1
NOTE: Ensure that the DIMM is installed in the
same socket on the new appliance from which it
was removed on the old appliance.
NOTE: Ensure that the drive is installed in the
same bay on the new appliance from which it
was removed on the old appliance.