HP StorageWorks Virtual Array 7000 Family User and Service Guide (January 2005)
Table Of Contents
- Warranty Information
- Product Overview
- System Configurations
- Lowest Entry Point, Non-HA Minimum Configuration (VA 7100 only)
- Lowest Entry Point, Non-HA Minimum Configuration (VA 7410)
- Entry Level Non-Cluster With Path Redundancy (All VA arrays)
- Entry Level Cluster with Path Redundancy High Availability (VA 7410)
- Midrange Non-Cluster (All VA arrays)
- Midrange Non-Cluster (VA 7410)
- Midrange Non-Cluster with Full Storage Path Redundancy (All VA Arrays)
- Typical Non-Clustered with Path Redundancy (VA 7410)
- Typical Clustered Configuration (All VA models)
- Typical Clustered Configuration (VA 7410)
- HP-UX MC Service Guard or Windows 2000 Cluster (All VA arrays)
- Highly Redundant Cluster (VA 7410)
- Typical Highly Redundant Cluster (All VA models)
- Typical Highly Redundant Cluster (VA 7410)
- Troubleshooting
- Servicing & Upgrading
- Specifications & Regulatory Statements
Troubleshooting 83
Troubleshooting
Figure 30 Disk Enclosure LCC LEDs
Table 15 LCC ACTIVE & LCC FAULT LEDs Status Indications (See Figure 30)
Table 16 PORT 0 & PORT 1 LINK ACTIVE LEDs Status Indications (See Figure 30)
Table 17 2G LED (DS 2405 Disk System Only)
LCC ACTIVE
(Green)
LCC FAULT
(Amber)
Indication
Off Off LCC not under power.
On Off LCC under power and operating normally.
Off On LCC fault.
Flashing Off LCC self-test in progress.
PORT 0/PORT 1
LINK ACTIVE
(Green)
Indication
Off LCC not under power
or
Fibre Channel link not active.
On Fibre Channel link active.
2G (Green) Indication
Off FC Loop Speed set to 1 Gbit/second
On FC Loop Speed set to 2 Gbit/second