HP StorageWorks Virtual Array 7000 Family User and Service Guide (January 2005)
Table Of Contents
- Warranty Information
- Product Overview
- System Configurations
- Lowest Entry Point, Non-HA Minimum Configuration (VA 7100 only)
- Lowest Entry Point, Non-HA Minimum Configuration (VA 7410)
- Entry Level Non-Cluster With Path Redundancy (All VA arrays)
- Entry Level Cluster with Path Redundancy High Availability (VA 7410)
- Midrange Non-Cluster (All VA arrays)
- Midrange Non-Cluster (VA 7410)
- Midrange Non-Cluster with Full Storage Path Redundancy (All VA Arrays)
- Typical Non-Clustered with Path Redundancy (VA 7410)
- Typical Clustered Configuration (All VA models)
- Typical Clustered Configuration (VA 7410)
- HP-UX MC Service Guard or Windows 2000 Cluster (All VA arrays)
- Highly Redundant Cluster (VA 7410)
- Typical Highly Redundant Cluster (All VA models)
- Typical Highly Redundant Cluster (VA 7410)
- Troubleshooting
- Servicing & Upgrading
- Specifications & Regulatory Statements
138 Servicing & Upgrading
Only wrapped firmware files should be used when downloading
LCC firmware. This will prevent downloading the wrong firmware
to the LCC.
Download new firmware to an LCC using
HP CommandView SDM
software.
(See “Upgrading LCC Firmware” in the Help System.)
Upgrading Disk Firmware
(HP Service Personnel Only)
Caution To prevent data loss, it is recommended that a full backup be
performed before starting this procedure.
Download new firmware to a disk drive using
HP CommandView SDM
software. (See “Upgrading Disk Firmware” in the Help System.)