Using VADIAG on HP-UX

SETOPTIONS 27

SETOPTIONS

View and modify SCSI Mode parameters.

Syntax

setoptions

Description

This command returns SCSI mode sense parameters on the selected array and enables you to

modify changeable parameters.

Example

VADIAG> setoptions

Parameter information for ArrayIndex 0

Select the number of the parameter to modify.[Return quits]:

Subsystem Parameter Value Subsystem Parameter Value

------------------------------- ------- -------------------------------- -------

1 Subsystem State Ready 17 Reserved 0

2 Overcommit Enabled OFF 18 Controller 1 Port 0 Loop ID 107

3 Host Spare Desired OFF 19 Reserved 0

4 Part OFF 20 Enable Manual Override OFF

5 Rebuild in Progress OFF 21 Manual Override Destination OFF

6 Auto-Rebuild ON 22 Embedded Processor Download OFF

7 Auto-Include ON 23 Language English

8 Balance in Progress OFF 24 Capacity Depletion Threshold 0

9 Optimize in Progress OFF 25 Reserved 0

10 Migrating Write Destination OFF 26 Write Working Set Interval 8640

11 LUN Security Enabled OFF 27 Subsystem Identifier 1

12 Rebuild Priority ON 28 Rebuild Progress 0

13 Cntrl Download in Progress OFF 29 Reserved 0

14 Shutdown Completion Control OFF 30 Microcode Download Progress 0

15 Unit Attention ON 31 Cntrl 0 Host Port Behavior 1

16 Controller 0 Port 0 Loop ID 109 32 Cntrl 1 Host Port Behavior 1