Storage Mirroring User Guide

14 - 16
HPQueueRatio Ratio of replication packets to one mirror packet
Values: 0 - 65535
Default: 5
A HPQueueRatio of 5 indicates 5 replication packets to
1 mirror packet.
If you change this value, the source service must be stopped and restarted to implement the
change.
IgnoreArchiveBit Specifies if the archive bit is compared during verification
Values:
(
0) Archive bit is compared during a verification
(
1) Archive bit is not compared during a verification
Default:
1
IgnoreDeleteOps Specifies if file and directory delete operations will be replicated to the target
Values:
(
0) Delete operations are replicated to the target
(
1) Delete operations are not replicated to the target
Default:
0
IgnoreThumbnail
Streams
Specifies if file and directory delete operations will be replicated to the target
Values:
(
0) Storage Mirroring will mirror and replicate all data streams
(
1) Storage Mirroring will not mirror or replicate any data about the alternate data streams for
thumbnail images. When comparing data for a verification or difference mirror, alternate data
streams for thumbnails will not be reported as different. (no restart)
Default:
1
If you change this value to 0, you must restart the Storage Mirroring service in order for the
Storage Mirroring driver to begin sending all data stream information to the service. If you change
this value to 1, you do not need to restart the service.
InstallPath Path specified during the Storage Mirroring installation
Values: any valid path
Default: specified during installation
InstallVersionInfo Installation number specified during the Storage Mirroring installation
IntermediateQueue
Limit
Amount of memory that may be allocated to the intermediate queue by the system memory
manager when MemoryAllocatorMode is set to mixed mode (
2).
Values: 512-4194304
Default:
65536 bytes
The Storage Mirroring service must be restarted in order for this change to take effect.
IPFailover Specifies whether or not to failover the IP addresses during failover
Values:
(
0) Do not failover IP addresses
(
1) Failover IP addresses
Default:
1
LanguagesAvailable Specifies the Storage Mirroring language support that has been installed. Do not modify this
setting. If you need to add or remove language support, use the Storage Mirroring installation
program.
Program Setting Description