Storage Mirroring User Guide

9 - 12
To determine the current status of the verification log append setting, use the get command with the VerifyLogAppend
option.
3. To modify the verify log file append setting, use the set command with the VerifyLogAppend option. The
VerifyLogAppend option is set to 1 for append or 0 for overwrite. By default, log file is appended.
4. To determine the maximum file size of the verification log, use the get command with the VerifyLogLimit option.
5. To modify the maximum file size of the verification log in bytes, use the set command with the VerifyLogLimit
option. The default size is
1048576 KB and is limited by the available hard drive space up to 4194304 KB (4 GB).
Monitoring verification
In addition to the verification log, Storage Mirroring offers a variety of methods for monitoring Storage Mirroring activity. For
detailed information, see Monitoring Tools on page 13-1.
Examples
! set netport=1100
! set VerifyLogName=”HA server.log”
! set DefaultAddress=”129.12.34.3”
Notes ! Some settings, although immediately applied to Storage Mirroring, will not take effect until the
client or service is restarted. For example, the Text Client must be closed and reopened for a
change to ClientLogName to take effect. And the service must be restarted to cause a change in
the modules loaded if the LoadSourceTarget setting is changed. See
Storage Mirroring Text Client
program settings
on page 14-11 for details on each configuration option.
! If you do not specify a machine name, the value from the current source will be updated. If you
have not identified an active source, no changes will be made.