Storage Mirroring Evaluation Guide

! Transmit—The Transmit tab allows you to specify transmission limiting critiera

including bandwidth throttling, start and stop criteria, and a transmission window.

! Verify—The Verify tab allows you to specify when a verification will be performed and

how often.

! Failover—The Failover tab allows you to configure failure monitoring.

12. You will have the opportunity to configure failover, later in this process, using the Failover

Control Center and it is not necessary to make any changes to any of the advanced settings

for this evaluation. Therefore, click Connect to establish the connection.

NOTE: These advanced options are explained in full detail in the HP OpenView

Storage Mirroring User’s Guide and are not recommended for this

evaluation.

NOTE: You will be prompted to save your newly created replication set. Click Yes

to save it and establish your connection.