HP StorageWorks Storage Mirroring Reporting Center user's guide (T2558-96324, April 2009)

5 - 32
Configuration reports
Storage Mirroring server configuration
The Storage Mirroring Server Configuration report displays information about the configuration of a
Storage Mirroring server.
To run the Storage Mirroring Server Configuration report, select a Storage Mirroring server in the
tree. Right-click and select Configuration Reports, Server from the menu.
The following information is returned by this report:
z Server—The hostname of the Storage Mirroring server
z IP Address—The IP address of the host running the Storage Mirroring server
z Version—The version of Storage Mirroring running on the server
z Activation Code—The Activation Code used by the server
z Memory Limit—The Amount of Windows system memory that will trigger queuing to disk
z Disk Limit—The maximum amount of disk space that Storage Mirroring will use. This field is only
displayed if the disk limit is configured in Storage Mirroring
z Min Free Disk—The minimum free disk space that Storage Mirroring will observe
z Email Enabled—If selected, email notifications are enabled on the server
z Failover Enabled—If selected, failover is enabled on the server
Target queue The information returned by this report includes:
z Server—Name of the Storage Mirroring server
z Source—The name of the source server
z Target—The name of the target server
z Source IP Address—The address of the source server
z Target IP Address—The address of the target server
z Disk Queue—The number of bytes in the target disk queue
z Total Queue—Total bytes in queue programmatically calculated
by adding mirror and replication queues
z Memory Queue—Bytes in memory queue programmatically
calculated by adding mirror + replication - disk queue
Storage Mirroring
transmission
z Server—Name of the Storage Mirroring server
z Source—The name of the source server
z Target—The name of the target server
z Source IP Address—The address of the source server
z Target IP Address—The address of the target server
z Transmit Rate—Calculated by dividing the difference in bytes
transmitted between reports by the difference in time between
reports
z Transferred—Amount of compressed data moved from source
z Transmitted—Amount of uncompressed data transmitted from
source
NOTE: The value
-1 will display when the limit is set to unlimited.
Report Information displayed