HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

635 of 739
4. Select Enable Scheduled Snapshots.
5. Specify when snapshots should be taken, indicating minutes, hours, or days. The
snapshots should be at least 15 minutes apart. By default, a snapshot is taken
every hour.
6. Specify if you want the snapshots to start immediately. Otherwise, enter a date and
time for when the snapshot schedule will begin.
7. Click OK to save the settings.
Taking snapshots manually
You can manually take a snapshot of the data on the target at any time. If an automatic or
scheduled snapshot is currently in progress, Storage Mirroring Recover will wait until
that one is finished before taking the manual snapshot. Open the Replication Console,
right-click the connection, and select Snapshot Now.