HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Options
l con_id—Connection ID assigned to the source/target connection
l target—Name of the target, an IP address on the target, or a
virtual IP address
Examples
l snapshot schedule 1 disable
l snap sched 1 disable
Notes
l This command only disables the snapshot schedule for this
connection so that it will not run. It does not clear the snapshot
schedule parameters.
l Target names that contain non-alphnumeric characters must be
enclosed in quotation marks.
4. You can enable a disabled snapshot schedule by using the snapshot schedule
enable command.
Command
SNAPSHOT SCHEDULE ENABLE
Description
Enables a disabled snapshot schedule
Syntax
SNAPshot SCHEDule <con_id> ENABLE [ON <target>]
Options
l con_id—Connection ID assigned to the source/target connection
l target—Name of the target, an IP address on the target, or a
virtual IP address
Examples
l snapshot schedule 1 enable
l snap sched 1 enable