HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

3. To initiate compression, use the compression enable command.
Command
COMPRESSION ENABLE
Description
Enables compression
Syntax
COMPRESSion ENABLE <con_id>
Options
con_id—Connection ID assigned to the source/target connection
Examples
compression enable 1
4. If you need to stop compression, use the compression disable command.
Command
COMPRESSIONDISABLE
Description
Disables compression
Syntax
COMPRESSion DISABLE <con_id>
Options
con_id—Connection ID assigned to the source/target connection
Examples
compression disable 1