HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

specify the fully qualified domain name.
l number—Any number indicating the length of time before the
transmission ends
l time_units—Minutes (min), hours (hr), or days (day)
l bytes—Number of bytes transmitted before the transmission ends
Examples
l schedule beta end duration=3 hr bytes=1500000
l sched beta end duration=6 hr
Notes
l If you use both of the end options, duration and bytes, the
transmission will be stopped when the first end option value is
met.
l Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.
5. You can specify a transmission window using the schedule window command.
Command
SCHEDULE WINDOW
Description
Sets criteria to only allow transmissions during a certain period of
time
Syntax
SCHEDule <target> WINDOW <hh:mm> TO <hh:mm>
Options
l target—Name of the target, an IP address on the target, or a
virtual IP address. Depending on the network route Storage
Mirroring Recover uses to access the target, you may need to
specify the fully qualified domain name.
l hh:mm—Time in hour:minute format using the 24-hour clock. The
first time is when the transmission will begin and the second time
is when the transmission will end.