HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

l bytes—Number of bytes that must be in the source disk queue to
initiate the transmission process
l number—Any number indicating how often the transmission
process will be repeated
l time_units—Minutes (min), hours (hr), or days (day)
Examples
l schedule beta start starttime=03/11/07 03:30, queuesize=10000,
every 6 hr
l sched beta start queuesize=100000000
Notes
l The start option EVERY cannot be used by itself and cannot be
the first option in a string of options.
l If you use more than one start option, the transmission will begin
when the first start option value is met. Additionally, each option
after the first must be separated by a comma, as illustrated in the
Examples.
l Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.
4. You can specify a transmission duration and a maximum number of bytes using
the schedule end command.
Command
SCHEDULE END
Description
Sets criteria to end the transmission of data from the source to the
target
Syntax
SCHEDule <target> END [ DURATION = <number> <time_units>
] [ BYTES = <bytes> ]
Options
l target—Name of the target, an IP address on the target, or a
virtual IP address. Depending on the network route Storage
Mirroring Recover uses to access the target, you may need to