HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Recover uses to access the target, you may need to specify the fully
qualified domain name.
Examples
l schedule beta disable
l sched beta disable
Notes
Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.
3. You can specify a start time, a repeat interval, and queue usage criteria using the
schedule start command.
Command
SCHEDULE START
Description
Sets criteria to start the transmission of data from the source to the
target
Syntax
SCHEDule <target> START [STARTTIME = <mm/dd/yy>
<hh:mm>] [MEMLIMIT = <percent>] [QUEUESIZE = <bytes>]
[EVERY <number> <time_units>]
Options
l target—Name of the target, an IP address on the target, or a
virtual IP address. Depending on the network route Storage
Mirroring Recover uses to access the target, you may need to
specify the fully qualified domain name.
l mm/dd/yy—Date in month/day/year format indicating when the
transmission will begin
l hh:mm—Time in hour:minute format using the 24-hour clock
indicating when the transmission will begin
l percent—Any number between 0 and 100 indicating the
percentage of system memory that must be in use to initiate the
transmission process