HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Scheduling data transmission
You can clear an existing schedule, disable or enable the use of a schedule, and set
start, stop, and window criteria.
Note: All transmission options are stored on the source machine until they are either
cleared or the option is updated. At this time, there is not a command to display
the existing transmission options.
1. To clear all existing transmission options, use the schedule clear command.
Command
SCHEDULE CLEAR
Description
Clears the existing transmission schedule for the specified target
Syntax
SCHEDule <target> CLEAR
Options
target—Name of the target, an IP address on the target, or a virtual
IP address. Depending on the network route Storage Mirroring
Recover uses to access the target, you may need to specify the fully
qualified domain name.
Examples
l schedule beta clear
l sched beta clear
Notes
Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.
2. Enable transmission limiting when you want to apply any transmission options that
have been configured. You can also disable the transmission options without
losing your settings. Use the schedule enable or schedule disable commands to