HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Syntax
TRANSmission STOP <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address. Depending on the network route Storage Mirroring
Recover uses to access the target, you may need to specify the fully
qualified domain name.
Examples
l transmission stop beta
l trans stop beta
Notes
Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.
3. To pause the transmission process, use the transmission pause command.
Command
TRANSMISSION PAUSE
Description
Pauses the transmission pause
Syntax
TRANSmission PAUSE <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address. Depending on the network route Storage Mirroring
Recover uses to access the target, you may need to specify the fully
qualified domain name.
Examples
l transmission pause beta
l trans pause beta