HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Stopping, starting, pausing, and resuming
transmission
You can stop, start, pause, or resume transmission.
1. To start the transmission process, use the transmission start command.
Command
TRANSMISSION START
Description
Initiates the transmission pause
Syntax
TRANSmission START <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address. Depending on the network route Storage Mirroring
Recover uses to access the target, you may need to specify the fully
qualified domain name.
Examples
l transmission start beta
l trans start beta
Notes
Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.
2. To stop the transmission process, use the transmission stop command.
Command
TRANSMISSION STOP
Description
Stops the transmission pause