HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Options
l con_id—Connection ID assigned to the source/target connection
l SYNC—Synchronizes any data that is different
l NEWER—Synchronizes only those files that are newer on the
source than on the target
l NOSYNC—Do not synchronize any data that is different
l CHECKSUM—Compares and/or synchronizes those blocks that
are different on the source than on the target based on checksum
comparisons
l NOCHECKSUM—Does not perform a checksum comparison
when comparing and/or synchronizing files
l STARTTIME—Starts the verification process at the time specified
l mm/dd/yy—Date in month/day/year format when the verification
process will begin
l hh:mm—Time in hour:minute format using the 24-hour clock
when the verification process will begin
l EVERY—Repeat the verification process at the frequency
specified
l number—Length of time to repeat the verification process
l time_units—Minutes (min), hours (hr), or days (day)
l ORPHANS—Moves or deletes orphan files on the target
l NOORPHANS—Does not move or delete orphan files on the
target
l CLEARRESTOREREQUIRED—Clears the restore required flag
and initiates the verification
Examples
l verify 1
l verify 2 sync, newer
l verify 2 every 2 hr
Notes
The default verification settings are sync, checksum, and noorphans.