HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

2. Identify the source that you want to initiate verification for by using the source
command.
Command
SOURCE
Description
Identifies a machine as the active source machine
Syntax
SOUrce <source>
Options
source—Name of the source
Examples
l source alpha
l sou alpha
Notes
Source names that contain non-alphanumeric characters must be
enclosed in quotation marks.
3. Initiate the verification process by using the verify command.
Command
VERIFY
Description
Verifies the integrity of the data between the source and target
machines
Syntax
VERIFY <con_id> [ SYNC [,NEWER] | NOSYNC] [,CHECKSUM |
NOCHECKSUM] [STARTTIME=<mm/dd/yy> [hh:mm]] [EVERY
<number> <time_units>] [ORPHANS | NOORPHANS]
[CLEARRESTOREREQUIRED]