HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Verify
Command
VERIFY
Description
Verifies the integrity of the data between the source and target machines
Syntax
VERIFY <con_id> [ SYNC [,NEWER] | NOSYNC] [,CHECKSUM |
NOCHECKSUM] [STARTTIME=<mm/dd/yy> [hh:mm]] [EVERY
<number> <time_units>] [ORPHANS | NOORPHANS]
[CLEARRESTOREREQUIRED]
Options
l con_id—Connection ID assigned to the source/target connection
l SYNC—Synchronizes any data that is different
l NEWER—Synchronizes only those files that are newer on the source
than on the target
l NOSYNC—Do not synchronize any data that is different
l CHECKSUM—Compares and/or synchronizes those blocks that are
different on the source than on the target based on checksum
comparisons
l NOCHECKSUM—Does not perform a checksum comparison when
comparing and/or synchronizing files
l STARTTIME—Starts the verification process at the time specified
l mm/dd/yy—Date in month/day/year format when the verification
process will begin
l hh:mm—Time in hour:minute format using the 24-hour clock when the
verification process will begin
l EVERY—Repeat the verification process at the frequency specified
l number—Length of time to repeat the verification process
l time_units—Minutes (min), hours (hr), or days (day)
l ORPHANS—Moves or deletes orphan files on the target
l NOORPHANS—Does not move or delete orphan files on the target
l CLEARRESTOREREQUIRED—Clears the restore required flag and
initiates the verification