HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Schedule Window
Command
SCHEDULE WINDOW
Description
Sets criteria to only allow transmissions during a certain period of time
Syntax
SCHEDule <target> WINDOW <hh:mm> TO <hh:mm>
Options
l target—Name of the target, an IP address on the target, or a virtual IP
address. Depending on the network route Storage Mirroring Recover
uses to access the target, you may need to specify the fully qualified
domain name.
l hh:mm—Time in hour:minute format using the 24-hour clock. The first
time is when the transmission will begin and the second time is when
the transmission will end.
Examples
l schedule beta window 23:00 to 06:00
l sche beta window 20:00 to 4:00
Notes
l Establishing a transmission window by itself is not sufficient to start a
transmission. You will need to specify a start criteria.
l Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.