HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Monitor Remove
Command
MONITOR REMOVE
Description
Removes an IP address that is currently being monitored
Syntax
MONitor REMove <IP_address> [monitor]
Options
l IP_address—The currently monitored IP address that should be
removed
l monitor—Name of the source machine designated as the monitor
Examples
l monitor remove 205.31.2.57 alpha
l mon rem 205.31.2.68
Notes
l If you do not specify a monitor, the current source designated as the
monitor will be used. If you have not identified a monitor, you will
receive an error message stating that a monitor has not been selected.
l Monitor names that contain non-alphanumeric characters must be
enclosed in quotation marks.