HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Limit Bandwidth Schedule Enable
Command
LIMIT BANDWIDTH SCHEDULE ENABLE
Description
Enables a bandwidth schedule
Syntax
LIMIT BANDWIDTH SCHEDULE ENABLE ON <target>
Options
target—Name of the target, an IP address on the target, or a virtual IP
address. Depending on the network route Storage Mirroring Recover uses
to access the target, you may need to specify the fully qualified domain
name.
Examples
limit bandwidth schedule enable on beta
Notes
Target names that contain non-alphanumeric characters must be enclosed
in quotation marks.