HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Limit Bandwidth Schedule Add
Command
LIMIT BANDWIDTH SCHEDULE ADD
Description
Creates a scheduled bandwidth event for limiting transmission of data
from the source to the target
Syntax
LIMIT BANDWIDTH SCHEDULE ADD <label> DAYS=<day1>[, day2,...,
dayN] STARTTIME=<hh:mm> LIMIT=<bytes>, <seconds> | UNLIMITED
TO <target>
Options
l label—Unique name that identifies this bandwidth scheduling event
l day1, day2,..., dayN—Day(s) of the week that you want to schedule the
bandwidth limitation for. You can either spell out the entire day or use
just the first two letters of the day.
l hh:mm—Time, using a 24-hour clock, to indicate when this event will
start
l bytes—Number of bytes to be transmitted
l seconds—Number of seconds to wait before transmitting again
l UNLIMITED—Bandwidth is not limited during this scheduled event
l target—Name of the target, an IP address on the target, or a virtual IP
address. Depending on the network route Storage Mirroring Recover
uses to access the target, you may need to specify the fully qualified
domain name.
Examples
l limit bandwidth schedule add weekday days=Mo, Tu, We, Th, Fr
starttime=06:00 limit=19300, 5 to beta
l limit bandwidth schedule add weekend days=Sa, Su starttime=04:00
limit=unlimited to beta
Notes
l This command transmits in bursts, not bytes per seconds. The time
identifies how long to wait before transmitting again. For example, if 5
seconds are specified and it only takes 2 seconds to send the specified