HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Email Set Filter Include
Command
EMAIL SETFILTERINCLUDE
Description
Specifies which Event Viewer messages are sent via e-mail
Syntax
EMAIL SETFILTERINCLUDE [INFO, WARNING, ERROR]
[EXCLUDEIDS "<ID1,ID2-ID4,...>"]
Options
l INFO—Information messages will be sent via e-mail
l WARNING—Warning messages will be sent via e-mail
l ERROR—Error messages will be sent via e-mail
l EXCLUDEIDS ID1,ID2-ID4,...—A comma separated list of IDs or ID
ranges. A space should separate the EXCLUDEIDS switch from the list
but within the list, there should be no spaces. Ranges are specified
with a begin and end number and separated with a dash (-). The entire
list should be enclose in quotation marks.
Examples
l email setfilterinclude warning, error
l email setfilterinclude warning, error excludeids "4007, 4012, 4015"
l email setfilterinclude excludeids "4000-4010, 5100"
Notes
l The default settings for this command are info and warning. No IDs are
excluded, by default.
l The options info, warning, and error can be used in any combination
and in any order. The first option does not require a comma, but the
second and remaining options do require a comma before the option.
l When changing the filter options, e-mail notification will automatically
be stopped and restarted. If a failure occurs while stopping or restarting
e-mail notification, Storage Mirroring Recover will output a related error
message