HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

TGDisableAttributeReplication
Description—Specifies whether or not the attributes compression, ACL,
and file mask are written to the target during mirroring and replication
Values—0 Enable attribute replication 1 Disable attribute replication
Default—0
GUI Setting—None
Service restart required—No
TGExecutionRetryLimit
Description—The number of times an unfinished operation will be retried
on the target before it is discarded. If this value is set to zero (0), an
operation will never be discarded and will be retried on the target until it is
applied.
Values—0 - 65536
Default—0
GUI Setting—None
Service restart required—No
TGFileAlloc
Description—Indicates that Storage Mirroring Recover allocates an entire
file on the first write of a mirror operation
Values—0 Disabled 1 Enabled
Default—1
GUI Setting—None
Service restart required—No
Notes—To help eliminate file fragmentation on the target server, Storage
Mirroring Recover should allocate the entire file first. With extremely large
files, the file allocation may take a long time. Therefore, you may want to
disable the file allocation. If you disable file allocation, you will have more
fragmentation on the target disk.
TGMirrorCapacityHigh
Description—Maximum percentage of system memory that can contain
mirror data before the target signals the source to pause the sending of
mirror operations.
Values—2-75