HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

EnableSnapshots
Description—Specifies whether Storage Mirroring Recover snapshot
functionality is enabled
Values—0 Storage Mirroring Recover snapshot functionality is disabled, 1
Storage Mirroring Recover snapshot functionality is enabled
Default—1
GUI Setting—None
Service restart required—Yes
Notes—This setting only impacts Storage Mirroring Recover snapshot
functionality. If this setting is disabled, other snapshot software such as
Microsoft Volume Shadow Copy will be not be impacted.
EnableTargetOpOrdering
Description—Identifies if the target will retain operations that are received
out of order so they do not need to be re-requested from the source,
allowing Storage Mirroring Recover to work more efficiently and reduce
retransmission of operations that are dropped, perhaps due to an
unreliable network
Values—0 the target will not retain operations that are out of order, 1 the
target will retain operations that are out of order
Default—1
GUI Setting—None
Service restart required—No, however you must disconnect and
reconnect any existing connections for the change to take effect
Notes—EnableTargetOpOrdering must be enabled on both source and
target to be used.
EnableTaskCmdProcessing
Description—Queues tasks inline with replication data
Values—0 Disable task command processing, 1 Enable task command
processing
Default—0
GUI Setting—Server Properties, Setup tab, Setup Options, Enable Task
Command Processing
Service restart required—No