HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Values—2 IPv4 protocol only, 23 IPv4 and IPv6 protocols, 3 TDU
(Throughput Diagnostics Utility)
Default—2
GUI Setting—None
Service restart required—Yes
DefaultReaderType
Description—Internal setting used by Storage Mirroring Replicate for
recoveries. Do not modify this setting.
DelayGCArbitration
Description—Number of seconds to delay the arbitration process. This
option allows time for the network to become stable before trying to
execute arbitration logic, for example, when a cluster failover has
occurred, but the network has a lag before it returns to a stable state.
Arbitration should not start until the network is back in that stable state.
Values—any positive number
Default—0
GUI Setting—None
Service restart required—No
DelayGCConnection
Description—Delays the GeoCluster Replicated Disk resource
connection to allow the cluster service enough time to reset
Values—1-15
Default—3
Service restart required—No
DirUNetPort
Description—Port used by pre-5.2 versions for directed UDP
communications
Values—1025 - 65535
Default—1105
GUI Setting—None
Service restart required—Yes