HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

bytes remaining to be mirrored. CalculateByVolume can be enabled as a
workaround. This setting will get the amount of disk space in use for the
entire volume from the operating system, so the calculation occurs
instantaneously. However, if the entire volume is not being replicated, the
mirror percentage complete and bytes remaining will be incorrect
accordingly.
CalculateOnConnect
Description—Specifies whether or not the replication set size should be
calculated on connection
Values—0 Do not calculate on connection, 1 Calculate on connection
Default—1
GUI Setting—Connection Manager, Mirroring tab, Calculate Replication
Set size on connection
Service restart required—No
CaseSensitiveRepSetQueries
Description—This entry is no longer used.
ChecksumAll
Description—Setting to allow for the difference checksum option on
mirror, verify, or restore to ignore the date, time, and size of the file and
perform a checksum calculation on all files
Values—0 Checksum using date, time, size comparison, 1 Checksum all
files regardless of the date, time, or file size
Default—1
GUI Setting—Server Properties, Source tab, Mirroring or Verify, Block
Checksum All Files on a Difference Mirror
Service restart required—No
ClusterDir
Description—Location of a Microsoft Cluster Service installation, if it
exists
Values—any valid path
Default—determined by the Microsoft Cluster Service installation
GUI Setting—None
Service restart required—No