HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Values—any integer
Default—30
GUI Setting—None
Service restart required—No
AutoRetransmit
Description—Determines whether or not a source that has lost its
connection with a target will attempt to reconnect to the target
Values—0 Do not attempt to reconnect, 1 Attempt to reconnect
Default—1
GUI Setting—None
Service restart required—No
BackupDir
Description—Location on the target of the backup of the replication sets
Values—any valid path
Default—the location where the Storage Mirroring Recover files were
installed
GUI Setting—None
Service restart required—No
CalculateByVolume
Description—Calculates the approximate size of a replication set by
using the size of the volume and subtracting the free space
Values—0 Disabled, 1 Enabled
Default—0
GUI Setting—None
Service restart required—No
Notes—If your replication set contains a large number of files, for
example, ten thousand or more, you may want to disable the calculation of
the replication set size so that data will start being mirrored sooner. If
calculation is enabled, the source calculates the file size before it starts
mirroring. This can take a significant amount of time depending on the
number of files and system performance. Disabling calculation will result
in the mirror status not showing the percentage complete or the number of