HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Configuring server settings
While only a subset of the server settings are available through the Management
Console, all of the Storage Mirroring Recover server settings are accessible through the
get and set commands. See Server settings for a complete list of the server settings.
l Retrieving setting values—To retrieve the current value of a setting, use the get
command. This command will return the value of the specified setting from the
specified server.
l Updating setting values—To update the value of a setting, use the set command.
This command will modify the value of the specified setting on the specified
server.
Command
GET
Description
Requests the value of a Storage Mirroring Recover program setting from
the specified server
Syntax
GET <setting> [machine]
Options
l setting—See Server settings for a complete list of the Storage
Mirroring Recover program settings
l machine—Name of the machine
Examples
l get AutoRemirror
l get MoveOrphansDir
Notes
l If you do not specify a machine name, the value from the current source
will be returned. If you have not identified an active source, no data will
be returned.
l Machine names that contain non-alphanumeric characters must be
enclosed in quotation marks.