HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Syntax
MONitor GET <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address
Examples
l monitor get beta
l mon get beta
Notes
Monitor names that contain non-alphanumeric characters must be
enclosed in quotation marks.
5. Initiate failback by using the failback command. If you specified a pre-failback
script in your failover configuration, that script will be executed at this time.
Command
FAILBACK
Description
Initiates the failback process for the specified monitor machine
Syntax
FAILBACK <monitor> [ON <target>]
REMONITOR|NOREMONITOR
Options
l monitor—Name of the source machine designated as the
monitor
l target—Name of the target, an IP address on the target, or a
virtual IP address
l REMONITOR—Automatically continues monitoring the source
machine after failback
l NOREMONITOR—Automatically discontinues monitoring the
source machine after failback.
Examples
failback alpha on beta remonitor